RTI Technologies, Inc4075 East Market St.York, PA 17402800-468-2321www.rtitech.comWARNINGDO NOT pour anything except newtransmission fluid into the fi
Page 9FLUID EXCHANGE (4,8,12,16,20 QUARTS)1. Vehicle engine is running and the ATX-2 is connected as previously described, READY light isilluminated.2
Page 10GOOD PRACTICEEmpty used fluid tank after every exchange procedure.DISCONNECTING FROM THETRANSMISSION SYSTEM- Caution -Hoses, fitting adapters a
Page 11EMPTY USED1. Connect red (positive) clamp on ATX power cable to red (positive) terminal on vehicle battery.Connect the black (negative) clamp t
Page 12Calibration - A Good PracticeThe ATX-2 is the most accurate of all transmission fluidexchange equipment due to the advanced load cell technolog
Page 13ATX-2 CalibrationThe ATX-2 is a high-tech, electronically controlled machine for exchanging transmission fluid. TheATX-2 is connected in seri
Page 14CALIBRATION WEIGHTTANKFLUIDUSEDLOAD CELLSNEWTANKFLUID10 kgCONTAINERCOLLECTIONBLACK HOSE8 FT.VALVECALIBRATION OF LOAD CELLSThe ATX-2 has two tan
Page 155342181096713 14151211PARTS IDENTIFICATION ATX-2Part No. Description1 024-80077-00 Keypad Overlay ATX-22 024-80079-00 Circuit Board ATX-2 (12VD
Page 16FLOW & WIRING DIAGRAM
Page 1Calibration - A Good PracticeThe ATX-2 is the most accurate of all transmission fluidexchange equipment due to the advanced load cell technology
Page 2(90°)(STRAIGHT)12 INCH HOSE ADAPTER12 INCH HOSE ADAPTERNEW - USED SIGHT BOWLSPRESSURE GAUGE(FILTERS)10 FT BLACK HOSE10 FT RED HOSESIGHT INDICATO
Page 3IMPORTANTCheck transmission fluid level according to manufacturer’sinstructions before connecting the ATX-2Adjust fluid level if requiredSafety
Page 4KEYPAD FUNCTIONSThe ATX-2 is an automatic transmission fluid exchanger featuring state-of-the-art electronic controlswith digital weight scales
Page 5KEYPAD FUNCTIONSTransmission fluid is emptied completely from the used fluid tank inside the ATX-2 intoa bulk used tank for proper disposal. Thi
Page 6IMPORTANTCheck transmission fluid level according to manufacturer’sinstructions before connecting the ATX-2Adjust fluid level if required90° Ada
Page 7IMPORTANTAttempt to pull hoses apart to ensure couplers are attached properlyCONNECTING TO THE TRANSMISSION SYSTEM3. Select and install proper f
Page 8FLUSH1. Vehicle engine is running and the ATX-2 is connected as previously described, READY light isilluminated.2. Slowly add Flush Solution as
Comments to this Manuals